How to Use a Spinning Reel?

Most anglers have experience with a spincast reel. For most of them, this was the first time they had a chance you start fishing. Once you get better at fishing, then you would step up to using the spinning reel.

How to Use a Spinning Reel?

Whenever you use a spinning reel, then you would open yourself to a whole new world of fishing techniques.

Today, we want to look at some of the basics of spinning reels and how you can use it to start fishing better.

The Basics

Spinning reels can also be called open face reels in some places. Spinning reels come with a fixed spool, thus meaning that it does not rotate. It gets its name from how the rotor spins and thus oscillating around the spool. This type of construction will lay the line evenly back on the device.

To understand spinning reel better, we have to look at its parts. They include;

  • Drag
  • Anti-reverse switch
  • Bail
  • Handle
  • Spool

1. The Drag

This is found on top of a spinning reel. This system is essential for adding or removing tension to the fishing line. There is a knob on the top of its spool allows for adjusting the frictionless plates.

When you adjust the plates, it will increase or decrease the tension in the land. Having this type of adjustability should be enough to help contain a fighting fish. You can now go out there and enjoy catching any fish size that you desire.

2. The Spool

The spool is found to be underneath the adjustment knob for the drag. The work of this part is to house the fishing line, which is always designed to be specific to a particular reel. The spool can be set to stop spinning even when you reel. This is aimed at keeping the line from tangling. As a result, you will end up with smooth casting and subsequent releasing.

Whenever you add a line to the spinning reel, you should check the spool’s rated line capacity. It is crucial if you hope to set up the correct line on your spool.

3. The Bail

Its bail is important since it serves two important purposes. The first one is that it serves as a casting trigger. In order to help cast the bait, open or activate the bail to spool your line properly. So as to prevent any accidental retrieval, you need to close its bail. Turn the handle like you would when reeling to close its bail.

The second function is to keep the fishing line centered while it rolls onto the spool. As you can see, without its bail, the fishing line would not have direction. As a result, you would end up with knots and reduced performance of your spinning reel. With your bail arm is crucial to keep the casts smooth. The same goes for retrievals.

4. The Handle

People love to use spinning reels because of their versatility. This is because you can easily switch the handle from one side to another. It is easier to switch it to your dominant hand as compared baitcasting reels that are hand specific.

5. The Anti-reverse Switch

This component is the final part you have to understand about a spinning reel. This switch is at the bottom of your reel. It comes in handy when you have to fight a fish. The work of this switch is to allow you to reel it in reverse. This is better than relying upon the drag system to get line tension.

From the various parts mentioned above, it is easy to see why anyone would want to get a spinning reel. It is worth noting that a spinning reel offers a lot of versatility. With its versatility, it is easy to see why many people would use it with multiple fishing techniques. It is still a good device for those who are beginners and they need to do something different.

For most users, they find it relatively easy to understand how it operates. As much as there might be some limitations at first, you should get better with time. We hope that right now you have an idea what a spinning reel is all about and how you can use it to your advantage.

Leave a Reply

Your email address will not be published. Required fields are marked *